Thursday, 5 January 2017

How To Properly Use The Combine Harvesters?

If you have hired or brought a combine harvester, then you must be eager to know how to use them. You are at the right place just continue reading and you will know how to use the combine harvesters using JD concaves. There are harvesters that are used for harvesting rice and wheat let us see how to operate them so that maximum efficiency is achieved.

This harvester performs every function harvesting to thrashing and cleaning the grains. This all can be done without any human intervention and the time required is dramatically less compared to if done manually.

Starting the harvester

Before you proceed with harvesting the machine should be started and the speed should be set so that the knife of the harvester does not get entangled with the straw.

Choosing the best time

The time plays a factor in harvesting. It is proper to harvest the crops after 9.00 am. The reason for this is that there is less dew and the crops are dry to be harvested. It is also not professional to harvest during or after a rain as this may lead to blocking the harvester and increasing the crop loss.

Adjustment of header

The header of the JD concaves should be properly adjusted. If the heat is high then it is seen that harvesting the small straws are difficult and it may also influence the next sowing. It is advised that in such a condition the header should be lowered but not more than 6 cm otherwise the soil will be cut and damage the knife.

Proper running of the machine

It should be ensured that the harvester is moving in a straight manner while harvesting. Otherwise, it may lead to not harvesting all the crops and leaving them in the field. Another thing to be noted while operating a harvester is that when it had to turn the harvesting should be stopped otherwise the grains may fall off from the truck.

Throttle Valve

The throttle valve should be kept at medium or in an open position while you are harvesting. If this is done while the harvester is leaving the harvesting area it will ensure that the crops are all out.


The harvesters should be properly cleaned of soil or any weeds that are left behind after harvesting. If this is not done properly then it may lead to blocking of the harvester during the next harvest.

No comments:

Post a Comment